About us  /  Organization  /  Quality Assurance  /  CSR  /  Contact  /  News

News

Hemeixin PCB’s flexible circuit are manufactured for application

Release time: 28/12/2017

We manufacture for application. This means we listen to your plans and then build high-quality, robust flexible circuit based on how you need to use them. From a simple circuit used as a connector between multiple boards to fully integrated wearable technology, our engineers work with you to deliver dynamic products. Finally you will be able to reduce material and labor costs, and control the number of complex cable connections in your design.

Hemeixin PCB’s flexible circuit can be strategically cut and formed for your product or application, including 3D shapes, cubes, cylinders and more. Our fully flexible circuit product line includes:

  •  Single-sided flexible circuit
  •  Double-sided flexible circuit
  •  Multi-layered flexible circuit
  • Flat flexible circuit
  • Sculpted finger circuits
  •  Reverse bared circuits
  • Customized, value-added options

For more details and specifications about Hemeixin PCB’s flexible circuit, Please send email to contact us  by sales@hemeixinPCB.com .

flexible circuit

There are two reasons for this bigger oversize. The first being the acceptance of the drill size(s) and locations; flexible circuit characteristically need a looser acceptance than conventional PCBs because their materials have less dimensional stability. The second cause for bigger oversize is to account for the adhesive which squeezes out into the openings. The goal is to contain a design such that the adhesive flows out to the pad but never on top of the pad, which affects the range of the annular ring. Once the lamination procedure is finished any element and/or characteristic openings are made using a drilling, routing, or laser cutting. Etching cannot be used.

There's nothing new about flexible circuit per se; small flexible circuit are widely used throughout industry (heck we use them). But using them to replace wiring in a car is something I haven't seen before. You would think they would be more expensive than simple wiring; but thinking about it there would be a number of advantages and I can see how it could lower costs overall.

As Jack pointed out, higher voltage DC allows you to use lighter wiring to deliver the same power. That makes using lighter weight flexible circuit more practical.

As for communications buses, those are already used in cars but flex circuits could make them better. flexible circuit can have tightly controlled impedance, which could help make high speed bus communication faster and more reliable.

Another point is that assembling wiring harnesses is still a fairly manual activity. flexible circuit are typically assembled by machine. The only difference is that these flex units would be much larger than usual, so perhaps some new handling systems would be required. If you can eliminate manual assembly of wiring harnesses there is a big potential there to lower costs.

flexible circuit can also have more on board than just connectors. They can also have electronic circuits built in. There could be communications switches and line drivers built right into them.

CAN bus already helps reduce wiring in cars. Back in the day if you wanted a switch to operate a window, there had to be a wire from that switch to the motor. Now there are multiple signals traveling on a single wire. This technique would presumably expand on that.