About us  /  Organization  /  Quality Assurance  /  CSR  /  Contact  /  News

News

Recommended oz per ft for heavy copper PCB maker - hemeixin

Release time: 10/01/2018

The printed circuit board (PCB) is a board that is used to trace and connect various connectors in equipment.

It is essential to ensure that there is an increased knowledge to properly connect the PCB for a smooth flow of electric current. The transmission lines are requiring being appropriately aligned to serve different electric purposes. The radio frequency in the PCB is used to monitor the changes in the electric current in producing the right outcome for the product. Most electronics are required to use the PCB in ensuring that there is a proper functioning of the device. Heavy copper PCB maker is essential in maximizing the power supply of equipment.

Heavy copper PCB maker

The surface pads of PCB is required to be made of copper in coming up with a product that is highly reliable and distributes power efficiently. Heavy copper PCB maker is required to have a proper thickness that will be able to handle different type of current frequencies of electronic devices. The recommended thickness of heavy copper PCB maker is one ounce for a square foot of thickness. The copper layers are used to disperse heat from the dice at a rate of 35 Am per ft. The 35 Am is for the common devices while for the heavy machinery in the industry sector use up to 400 Am of copper.

The copper weight determines the circuit flow requiring proper evaluation by the heavy copper PCB maker. The weights are required to be from 4 to 20 oz per ft for a proper flow of the electric current. The heavy machinery requires a proper PCB that will assist in carrying a large amount of electric current to the machinery. It becomes hard to suffer a machine breakdown when the heavy copper PCB maker is operating at high temperatures. The circuit layers are considered by heavy copper PCB maker in coming up with an effective combination that will provide required a current capacity for the machinery. The focus on coming up with multiple copper weights to be used in a similar circuit assists in the cooling of the equipment. Heavy copper PCB maker comes up with a plan where there are selected area to be covered with copper to deal with heat sinking to the cooler plate of the device. The heavy copper PCB maker is used in the military, automotive and industrial control sectors which require the use of high current circuit thus requiring a dependable copper printed circuit boards.