About us  /  Organization  /  Quality Assurance  /  CSR  /  Contact  /  News


Board soldering tool

Release time: 02/11/2018

Welding mechanism of the circuit board: in the process of soldering, the solder, the weldment and the copper foil are not melted by the welding heat, the weldment and the copper foil are not melted, the solder melts and wets the welding surface, and relies on the weldment and the copper foil. The movement of the atomic molecules causes the diffusion between the metals to form a metal alloy layer between the copper foil and the weldment, and the copper foil and the weldment are joined together to obtain a firm and reliable solder joint.

Board soldering tools mainly include: soldering iron, solder and solder and auxiliary tools.

pcb soldering service

Electric iron

Soldering iron is the most important welding tool in circuit board welding. Different soldering irons have different structures. The external heating type soldering iron is generally composed of a soldering iron head, a soldering iron core, a casing, a handle, a plug, etc., and the soldering iron head is installed in the iron core, and is made of a copper alloy material with copper as a base with good thermal conductivity; The soldering iron consists of five parts: connecting rod, handle, spring clip, iron core and soldering iron head (also called copper head). The iron core is installed inside the soldering iron head (heating is fast and the thermal efficiency is up to 85%~%%). There are many types of soldering irons. The heating methods can be divided into direct heating, inductive, energy storage and temperature regulation. The power can be divided into 15W, 2OW, 35W, 300W and so on.

2. Tin and flux

Solder and flux are also required for soldering.

Tin: A fusible metal that connects the leads of a component to the junction of a printed circuit board. Tin (Sn) is a silvery white metal with soft texture and high ductility. Its melting point is 232 ° C. It has stable chemical properties at normal temperature, is not easy to oxidize, does not lose metal luster, and has strong resistance to atmospheric corrosion. Lead (Pb) is a soft, light blue-white metal with a melting point of 327 ° C. High-purity lead is resistant to atmospheric corrosion and chemically stable, but harmful to humans. The addition of a certain proportion of lead and a small amount of other metals in tin can result in low melting point, good fluidity, strong adhesion to components and wires, high mechanical strength, good electrical conductivity, low oxidation resistance, good corrosion resistance, and bright and beautiful solder joints. The solder is generally called solder. Solder can be divided into 15 according to the amount of tin. According to the chemical composition of tin content and impurities, it can be divided into three grades: S, A and B. For soldering electronic components, a filament solder wire having a rosin core is generally used. This solder wire has a low melting point and contains a rosin flux, which is convenient to use.

Flux: It is divided into flux and solder resist according to function.

1 flux

The use of flux during the soldering process helps us remove oxides from the metal surface, which is good for soldering and protects the soldering iron tip. It can dissolve and remove the oxide on the metal surface, and surround the surface of the metal when welding is heated to prevent it from being oxidized by heating. It can reduce the surface tension of the molten solder and facilitate the wetting of the solder. Fluxes are generally classified into inorganic fluxes, organic fluxes, and resin fluxes. The flux currently used is rosin or pine perfume (the rosin is dissolved in alcohol); soldering paste can also be used when soldering larger components or wires, but it is corrosive and should be removed in time after soldering.

2 solder resist

The solder resist can cover the surface of the printed circuit board that does not need to be soldered, so that the solder can be soldered only at the required solder joints, which can protect the panel from being heated and impacted during soldering, and is not easy to foam, and also It can prevent bridging, tipping, short circuit, and virtual soldering.

When using flux, it must be applied according to the size and surface condition of the part to be welded. If the amount is too small, the quality of the welding will be affected. If the amount is too much, the flux residue will corrode the component or deteriorate the insulation performance of the circuit board.

3, auxiliary tools

In order to facilitate the smooth running of the weld, we also need some auxiliary tools. Such as needle-nosed pliers, tongs, tweezers and knives. Some of these tools can help us cut the components and pins, and some can help us check the soldering robustness. These auxiliary tools are also essential tools for our welding work.